IEC C14 to Right-Angled C13 Power Extension Cable, 10 A, Screw-Hole Mount

Rated 4.90/5 by 85 shoppers

€13.99

• Rated 10 A at 125–250 V AC, handling loads up to 1500 W
• Right-angled C13 connector keeps the lead flat against your equipment
• C14 inlet has screw holes for secure fixing to a panel or chassis
• H05VV-F cable with three 0.75 mm² full copper conductors
• Insulation resistance of 100 MΩ minimum, tested at 500 V DC
• Available in 30 cm, 50 cm and 60 cm lengths, measured end to end

This short IEC extension solves two common problems at once. The right-angled C13 end lets the lead exit sideways instead of sticking straight out — useful behind monitors, PCs and appliances pushed close to a wall or packed into a cabinet. And the C14 end has screw holes, so it can be fixed firmly to a panel where a loose inline connector would work free. The cable itself is H05VV-F with three 0.75 mm² conductors in full copper, insulated in PVC and rated at 10 A across 125–250 V AC for loads up to 1500 W. Insulation resistance is a minimum of 100 MΩ, tested at 500 V DC. Pick from 30 cm, 50 cm or 60 cm lengths — measured including the connectors — to keep cable runs short and tidy inside racks, AV units and workbenches.